1-800-668-2921

Wind Systems

Waterborne, Low-VOC & Traditional Materials

Wind System

Improve production, increase efficiencies, and improve your bottom line with the Wind System from Nova Verta. The Wind System improves flash and cure times by evenly increasing turbulent air within the paint booth, providing a breakup barrier around the vehicle or parts being coated. While originally designed to speed up flashing of waterborne coatings the system also works very well with all materials as can also be used in cure cycle.

Flash Time Reduction: Up to 50%
Curing Time Reduction: Up to 60%
Energy Savings: Up to 30%

Improve production, increase efficiencies, and improve your bottom line with the Wind System from Nova Verta. The Wind System improves flash and cure times by evenly increasing air velocity within the paint booth, providing an extra boost to air movement that is particularly useful when using waterborne coatings.

  • Up to 9 Times More Air Movement
    Ceiling filters channel pre-filtered cabin air through ductwork to specially designed blowers located on the exterior of the paint booth. The blowers expedite air velocity up to nine times faster than standard booth air flow and distribute the amplified air to the Wind System’s nozzles that disperse air evenly throughout the booth located just under upper light fixtures on each side wall.

 

  • Tailored Installation
    The Wind System is variable speed controlled and includes wiring from the operator panel to each blower motor fan. The system can be retro-fitted or included with any new Nova Verta system. Contact your local representative to tailor Wind System’s installation to your needs today.

 

  • Push Button Easy
    Wind System is easy to use. The control and operation are incorporated in the operator touch screen and allows full adjustment of times temps and air speeds. Also is featured customized recipes to choose from or design your own.

 

  • Add Up the Savings!
    The Wind System, while designed for waterborne materials, also accelerates flashing and curing times on solvent-based materials. No matter what material you use, Wind System is engineered to help you increase job throughput and use less energy per job. That means Wind System helps increase ever-diminishing profit margins by increasing your overall production. Testing results with products from major coating manufacturers prove typical performance results of saving production times as much as 30 minutes or more per job.

How much can you expect to save over the life of your booth?

Contact our development team and we'll do a custom analysis.

8207 E Trent Ave
Spokane Valley, WA 99212

8207 E Trent Ave
Spokane Valley, WA 99212